The fastest way to shield a room: a construction panel with lead foil bonded to one side of a plasterboard sheet.
Rooms housing equipment that emits radiation must be shielded so that it does not pass to the outside. The simplest method is lead-lined plasterboard.
The fibre board is intended for dry construction. The chipboard type performs well in wet construction. Both are suitable for partition walls, suspended ceilings and wall cladding.
The lead layer runs from 1.0 to a maximum of 3.0 mm. Where a thicker equivalent is required, a double layer of boards is used so that the lead thickness matches the figure in the shielding design.
Thanks to the outer lead layer the boards also act as fire protection and can serve as sound insulation - a 1.0 mm layer cuts noise by up to 12 dB.
| Lead thickness | Width | Length |
|---|---|---|
| 0.50 mm | 625 mm | 2,000 mm |
| 1.00 mm | 625 mm | 2,000 mm |
| 1.50 mm | 625 mm | 2,000 mm |
| 2.00 mm | 625 mm | 2,000 mm |
| 2.50 mm | 625 mm | 2,000 mm |
| 3.00 mm | 625 mm | 2,000 mm |
| Lead thickness | Width | Length |
|---|---|---|
| 0.50 mm | 625 mm | 1,200 mm |
| 1.00 mm | 625 mm | 1,200 mm |
| 1.50 mm | 625 mm | 1,200 mm |
| 2.00 mm | 625 mm | 1,200 mm |
| 2.50 mm | 625 mm | 1,200 mm |
| 3.00 mm | 625 mm | 1,200 mm |
The type of material, the thickness and the dimensions are enough. If you need a non-standard shape, send a drawing - we accept .dxf files and dimensioned sketches.